Industrial pumps are evolving fast and continually with the advancement of technologies in different domains like structuring designs, winding types, safety measures, mechanical properties etc. It is very common in commercial and industrial setups using mechanical equipment to move the liquid from a lower level to a higher level or move fluid from a low-pressure area to a high-pressure area. The numbers of engineers and industry owners take industrial pumps just as a device to serve both purposes and do not pay due attention as they should do to get the peak performance for improved profitability. The unfamiliarity with the latest developments in the pumping industry often lowers the performance at liquid and fluid management. Here in this blog, I summarize the latest options that you can consider while selecting and buying CG industrial pumps- known for their performance worldwide.

Two Types Of Industrial Pumps-Which Is The Best For You? 

1. Positive Displacement Pumps: These pumps make move fluid by trapping a fixed amount and forcing the trapped volume of fluid into the discharge pipe. The positive displacement pumps are designed with an expanding cavity on the suction side and a narrowing cavity on the discharging side. The diaphragm pumps, peristaltic pumps, gear pumps, piston pumps, lobe pumps, etc come in to the positive displacement pumps category.
2. Dynamic Pumps: Also known as Rotodynamic pumps, these are velocity pumps. These are designed to use kinetic energy to increase the flow velocity of the fluid. This increase in the energy of fluid results in higher potential energy (pressure) while the velocity is reduced when the flow of fluid exits the pump. The dynamic pumps are classified into a centrifugal, horizontal centrifugal, submersible, fire hydrant, vertical centrifugal, etc categories.

CG Industrial Pumps- What Are Your Options? Industries worldwide are highly dependent upon the performance of pumping systems. The industrial pumping system accounts for 20% of the global industrial electrical energy consumption. Crompton Greaves industrial pumps & fire fighting pumps have unique repute worldwide for their performance and long life. The low maintenance charge also goes in favor of this #1 industrial pump brand. The prominent categories of CG Industrial Pumps are-

• Industrial Monoblock (MI Series): 6 Meters to 69 Meters head; CI, bronze & stainless steel internals; 110 LPM to 2140 LPM discharge; up to 30 HP
• Vertical Inline Pumps (ILM Series): Coupled with TEFC motor with ‘F’ class insulation; 110^o C water temp.; up to 30 meters head; IP54; 3 phase, 50 Hz AC
• Pressure Boosting Systems/Pumps (PBS)/(CGHM & CGVM Series): Auto On/Off; VFD controls
• Self-Priming Non-Clog Dewatering Pumps: up to 4310 LPM; up to 36 meters head; up to 65° C temp.; mono-set construction; 0.75 to 18.7KW; IP 54
• End Suction Pumps (CGZ Series) With Horizontal Back Pull Out Design: Capacity up to 400 m3/hr at 1450 RPM.; ISO 2858 / ISO 5199; up to 16 bar pressure; flanges as per ASME (formerly ANSI) B16.1

To conclude, each industrial pump is designed for a specific application; therefore, the selection of industrial pump for a particular application becomes very important. The decision may need the involvement of specialists; here, the top CG distributors and suppliers like S.C.Industrial Syndicate offer online assistance to help the end users buy the right industrial pumps; and, there seems nothing better than the brand- Crompton Greaves.